Audio Visual Passive Interface Wallplate
The AVP1 is a dual-gang wallplate mounted interface device that allows the line-level outputs of audio and video tape/cassette recorders, phonographs, etc. to be connected to microphone inputs of house P.A. systems. It is available on a brushed stainless steel or black anodized aluminum wallplate. Click here for more information.
AVP1BLK Black Annodized Aluminum
AVP1STS Stanless Steel
| Model | Description |
|---|---|
| AVP1BLK | AVP1BLK |
| AVP1STS | AVP1STS |
- Speaker Input
1/4” 3-conductor phone jack, wired for use with standard 2-conductor plug, accepts signals from unbalanced line level or speaker-level sources such as phonographs, audio and video tape recorders and movie projectors. Has 16-ohm, 5-watt dummy load, 20 dB attenuator network, and low-pass filter (-3 dB @ 8 kHz, 6 dB/octave). Input impedance: approx. 16 ohm.
- LINE INPUT L/R:
RCA phono jacks, resistively mixed to monaural, for signals from nominal -10 dBV sources such as radio, cassette or VCR outputs. Input impedance: approx. 4 kohm.
- MIC INPUT:
Female 3-pin XLR-type connector provides independent microphone input (brought out to output barrier strip) for announcer, lecturer, etc.
- HUM CANCEL:
Ground-lift switch, used to reduce hum and buzz by eliminating ground loops and providing proper grounding for various conditions. Breaks connection between input and output shields.
- INPUT LEVEL CONTROL:
10kΩ linear input level control with a 0 to 10 calibrated knob.