Description

The MS-1 splitter box is the answer for anyone needing to split a Lo-Z microphone signal (or similar source) into two outputs.  Uses include live recording, on-stage monitoring, press conferences, videotaping of lectures.  By using only the isolated output, it can work as an isolation transformer for long microphone lines feeding unbalanced inputs.  Transformer isolation can help minimize interference from radio transmitters, lighting dimmers, and 60hz AC power wiring.  Hookup requires only standard XLR mic cables.  It has an input, a direct output (allows phantom power to pass), an isolated output to keep the outputs discreet from each other, a ground lift switch for buzz-free operation in almost any environment and a formed steel box.  The connectors and switch are recessed to resist damage.

Features

• Split a Lo-Z microphone signal (or similar source) into two outputs

• By using only the isolated output, it can work as an isolation transformer for long microphone lines feeding unbalanced inputs

• Transformer isolation can help minimize interference from radio transmitters, lighting dimmers, and 60hz AC power wiring

• Hookup requires only standard XLR mic cable

• It has an input, a direct output (allows phantom power to pass), an isolated output to keep the outputs discreet from each other, a ground lift switch for buzz-free operation in almost any environment and a formed steel box

• Heavy duty steel box

• Superior quality connectors and transformer

• Recessed connectors and switches to prevent damage

• Ground lift switch to eliminate hum

• Individually tested for performance and quality

Specifications

Approximate size: 3 3/4"(w) x 5"(h) x 1 7/8"(d)
The following is a list of connectors on this item:

Model Number

Downloads

 cut sheet

 complete transformer specs

Warranty

All RapcoHorizon devices carry a full limited lifetime warranty to the original purchaser against defect in materials and workmanship.  Custom lengths or configurations carry a 1 year warranty.  Items returned for warranty should be sent freight prepaid to our factory at the address listed below.

Please include proof of purchase, a brief description of the problem and your name and return shipping address.   Qualifying items will be repaired or replaced at our discretion and shipped to the return address provided via normal ground service.

The RapcoHorizon Company
3581 Larch Lane
Jackson, MO 63755